HI - PRECISION CALIBRATION LABORATORY
(An NABL
accredited Calibration Laboratory as per ISO/IEC: 17025: 2005)
Overview:
High
Precision Calibration Facilities
High
Precision Calibration Lab, at AUTOCAL, Vasai
Road is established for electro technical parameters calibration.The ASPL
laboratories establish the measurement traceability to the national /
International standard through the HPCL at Vasai Road. The laboratories are
equipped with complete range of most accurate and stable standards and
measuring instruments traceable to national / International standard and are
manned by qualified and well-trained personnel.
The
state of the art high precision calibration facilities includes Electronic
Standard Cells, Multifunction Transfer Standard, Thermal Transfer Standard,
Multifunction Calibrator, AC/DC Current Shunts, RLC Standard , Frequency
Standard, Power/ Energy Standard.
Each
calibration performed includes detailed calibration report containing measured
values, measurement uncertainty and measurement traceability at each point of
measurement.
Services Offered [NABL Certificate No.C-0916]:
The
Calibration Services cater to almost all commercially available high precision
equipment viz, DC/AC Voltage and Current Calibrator, Multifunction Calibrators,
7½ / 8½ Digit Multi meters, Standard Cells, Frequency Standard, LCR Standard,
Power Energy Calibrators, Power Meters etc.
The
key areas of high precision calibration services include:
·
Voltage AC/DC
·
High Voltage AC/DC
·
Current AC/DC
·
Time and Frequency
·
RLC
·
Oscilloscope Amplitude, Time base &
Bandwidth
·
Power / Energy
Recognitions and Accreditation:
The
High Precision Calibration laboratory at Vasai Road is accredited by NABLstandard
ISO / IEC17025. The management quality system implemented in the laboratory and
the technical competence of Laboratory personnel are compiled to the requirement
ofthe international standard ISO / IEC17025. The laboratories also participating
in the ILC / PT (Proficiency Testing) programs self-initiated & organized
by National accreditation bodies and have satisfactory performance. It is an
important requirement of ISO/IEC 17025 Standard. Apart from Electrical
Calibration ASPL laboratories are
providing calibration services for Temperature, Humidity, Dimensions, Mass,
Pressure and Gas flow. The calibrations facilities are regularly upgraded with state
of art technology equipments/standards. All ASPL measurement capabilities are
traceable to the national and international standards through an unbroken
Traceability chain vide High Precision calibration Laboratories. ASPL
laboratories also cater to the onsite calibration requirement of customers.
These services are provided to customers for almost all electronic test and
measuring instruments, on request.The calibration reports issued take wide
acceptability and include measurement uncertainty. The turn around time for
calibration of instruments is minimum and the calibration charges are very
competitive.
Services Offered in the field of:
·
Dimension
·
Temperature
·
Humidity
·
Mass and volume
·
Pressure
·
Gas flow
Recognition and Accreditation:
The
quality system implemented in the laboratory and the technical competence are
compiled to the requirements of the international standard ISO / IEC17025.The
laboratories are accredited/in the process of accreditation by the National
Accreditation Board for Testing & Calibration Laboratories (NABL). The
standards maintained are traceable to national standards.
- Calibration
Autocal
Solutions Pvt. Ltd. is an independent Calibration Laboratory accredited
by NABL providing
services for the following parameters at its state of the art laboratory which
is equipped with Reference Calibration Standards from world renowned brands
like FLUKE, HART
SCIENTIFIC, WIKA, CRYSTAL ENGINEERING, RENSE INSTRUMENTS, DRUCK which are
traceable to National and International standards like NPL, WIKA, ERTL, IDEMI ARAI, FCRI.
We also provide Onsite Calibrations.
Scope of Calibration
PARAMETER
|
Range
|
PRESSURE
|
0 to 1000 bar
|
VACUUM
|
(-0.9) to 0 bar
|
LOW PRESSURE
|
200 mmWC
|
TEMPERATURE
|
(-38) to 1000oC
|
RH
|
10 – 90%RH
|
ELECTRO-TECHNICAL
|
Source and Measure:
1000 VDC 750 VAC 1000 ADC 1000 AAC 100 MΩ(DC) 100 kHz |
TEMPERATURE
SIMULATION |
All types of RTDs &
Thermocouples |
TIME
|
Upto 24 hrs
|
SPEED
(Contact & Noncontact) |
150 to 18000 RPM
|
MASS
|
Upto 150 kg
|
VOLUME
|
1µl to 150 litres
|
FORCE
|
500 kN (T & C)
2000 kN (C) |
TORQUE
|
1000 Nm
|
DIMENSION
|
Upto 600 mm
|
CONDUCTIVITY & pH
|
At Selected Points
|
AIR VELOCITY
|
10 m/s
|
LUMINOUS INTENSITY
|
20000 lux
|
- Thermal Validation
You spent years developing the product ……………….
You can’t afford to wait that long to VALIDATE
Whether you are subjected to regulatory body audits
such as WHO (Schedule M),WHO (Geneva), TGA, USFDA, MHRA, MCC, ENVISA, we can
help you with your entire validation requirements for complying with GMP, cGMP,
GAMP 5, 21 CFR Part 11 Software Validation and achieve the right level of
validation and traceability to National and International Standards.
The Industry refers to VALIDATION as “Establishing
documented evidence that a process or system when operated within established
parameters can perform effectively and reproducibly to produce a product which
meets its pre-determined specifications and quality attributes”. We offer a
full range of validation services which includes;
STERILISERS
|
We perform precise Temperature Mapping Analysis of AUTOCLAVES, DRY HEAT STERILISERS, ETO
STERILISERS & TUNNELS which includes empty
chamber heat distribution study, load pattern distribution and penetration
study.
F0, Fd, Fh, min. & max. Temperature, graphical presentation of Temperature V/s Time, Standard Deviation, Lag Time Calculation, Identification of Hot & Cold spots are some of the features of our reports generated through our specially designed software. |
QA/QC
EQUIPMENTS
|
Incubators, BOD Incubators, CO2 Incubators, Stability
Chambers, Orbital Shakers, Refrigerators, Deep
Freezers, Ultra Low Deep Freezers, Water Baths, Hot Air Ovens, Muffle
Furnace, Vacuum & LOD Ovens, Cold Chambers, HPLC, GC, Air
sampler.
The reporting format consists of diagram indicating sensor location, min. & max. Temperature for all locations, graphical presentation of Temperature V/s Time, Hot & Cold spots identification. Reporting MEAN KINETIC TEMPERATURE CALCULATION is our speciality |
Ware house
Mapping
|
Autocal offers a complete Temperature & RH mapping service for any
warehouse facility in compliance to regulatory guidelines.
To comply with current guidelines, mapping of a warehouse must be conducted seasonally. We use small telemetry sensors which have the capabilities of monitoring temperature and RH simultaneously. Due to the size of these sensors, routine operation of the warehouse is not affected during the mapping study. |
- Cleanroom
Validation
Autocal provides an all-inclusive service in the
qualification of clean rooms at your facility. We offer reassurance that the
controlled environment is monitored to your specific requirements and
applicable standards.
The quality of products manufactured not only depends
on manufacturing techniques but also on the quality of environmental
conditions. In conjunction with qualification of the clean rooms the associated
ventilation systems must also be qualified. Qualification entails checking
clean room facilities for compliance with relevant regulatory guidelines along
with evaluation in terms of measurement and monitoring techniques.
Autocal offers qualification in the areas of:
Test
conducted
|
Confirmation
with Guide lines
|
|
|
